Укрпромизол ЛТД

Basalt soft thermal insulation pad
ТУ У В.2.7-23.9-37807011-001:2019

ПМ, ПЖТЗ, ПМТБ

Basalt soft thermal insulation pad

Mineral slab of basalt wool

Hard heat and sound insulating plates

ТУ У В.2.7-23.9-37807011-001:2019
ДСТУ Б В.2.7-316:2016

Plates are available in the form of a rigidly formed heat insulating material. Depending on the type of plate, the production uses BSTV basalt superthin fiber or BTV thin basalt fiber.

Dimensions
Length – from 500 to 1200mm with an interval of 10
Width – from 500 to 1100 mm with an interval of 10
Thickness – 14; 19; 22; from 20 to 200 mm with an interval of 10

Plates are convenient to use rigidly formed basalt thermal insulation for insulation of horizontal and vertical flat surfaces. They are fireproof material.

Scope and features of application

  • It is used for insulation of flat and pitched roofs, external and internal walls, partitions, heat and sound insulation of floors, under the screed or bulk floor
  • Thermal, sound, fire insulation of industrial facilities. Isolation of boilers, furnaces, tanks, ship premises.

Specifications

The name of indicators Values ​​for PMTB boards
120 140 160 180 200
Density, kg / m3, no more 120 140 160 180 200
Thermal conductivity, W / (m · K), no more, at a temperature:

– (25±5)°С

– (125±5)°С

– (300±5)°С

 

0,044

0,064

0,106

 

0,047

0,065

0,110

 

0,050

0,068

0,110

 

0,052

0,070

0,115

 

0,055

0,077

0,120

Compressive strength at 10% linear strain, MPa, not less 0,04 0,05 0,05 0,06 0,08
Humidity,% by mass, no more 2,0
Water absorption at partial immersion in water,% by mass, not more than 20
Organic matter content,% by mass, not more than 1,5
Паропроницаемость, мг/м·год•Па, не менее 0,3
Name of indicators Value for PM and ПЖТЗ plates
75 125 175 225 240 280 300
Density, kg / m3, no more 75 125 175 225 240 280 300
Thermal conductivity, W / (m · K), no more, at a temperature:

– (25±5)°С

– (125±5)°С

– (300±5)°С

 

0,040

0,060

 

0,042

0,062

 

0,048

0,062

 

0,052

0,067

 

0,054

0,070

0,100

 

0,056

0,075

0,120

 

0,060

0,082

0,150

Pressure strength at 10% linear strain, MPa, not less 0,02 0,04 0,06 0,10 0,12 0,15 0,18
Humidity,% by mass, no more 2,0
Water absorption at partial immersion in water,% by mass, not more than 30
Organic matter content,% by mass, not more than 1,5
Vapor permeability, mg / m · year • Pa, not less than 0,3
Temperature of use of plates, ° С no more 750